コンパクトスイングゲート改札機

• Bi-directional Access Control: Allows entry and exit in both directions. Supports multiple access modes and user types.
• Motorized Swing Operation: The gate opens and closes smoothly with a quiet motor-driven mechanism.
• Compact Design: Slim body fits in narrow spaces without compromising functionality.
• Customizable Passage Width: Adjusts to meet wheelchair, ベビーカー, and luggage accessibility needs (typically 600–900 mm).
• Multiple Authentication Methods: RFID対応, QRコード, 指紋, 顔認識, モバイルアプリのアクセス.
• Anti-Tailgating and Anti-Pinch Protection: Sensors detect unauthorized trailing and prevent injury during gate movement.
• Fail-Safe Emergency Release: Gate opens automatically during power failure or fire alarm for safe evacuation.
• LED Indicators and Audio Prompts: Clear visual and audio feedback guides users during access.
• Fast Throughput: Processes 25–40 people per minute, 構成によって異なる.
• 耐久性のある構造: Built with stainless steel or aluminum housing and reinforced swing arms.
• Indoor and Outdoor Models Available: Optional IP54–IP65 weatherproof versions suit various environments.
• 簡単な統合: Works with third-party access control, チケット, and time attendance systems.

1. サイト準備

• Confirm the gate layout and dimensions on-site.

• Ensure the ground is level and solid (preferably concrete).

• Mark the exact installation points using the provided base plate template.

2. Cabling and Power Setup

• Lay power and communication cables (AC and control lines) through pre-installed conduits.

• Reserve extra cable length for internal wiring.

• Verify cable types and voltage match the gate’s technical requirements.

3. Fixing the Turnstile Body

• Position the gate body precisely over the marked points.

• Drill anchor holes and install expansion bolts.

• Secure the gate using anchor screws to ensure stability and alignment.

4. Internal Wiring

• Open the turnstile’s top or side panel to access internal wiring terminals.

• Connect the power supply (交流 100–240V) to the controller.

• Wire in the access control system (例えば。。, RFID reader, biometric module).

• Ensure communication lines (RS485/TCP-IP) are properly connected.

5. Functional Testing

• Power on the gate and check indicator lights, motor movement, and reader response.

• Test both entry and exit directions.

• Confirm anti-pinch, emergency release, and sensor alignment are working properly.

6. アクセス制御統合

• Install external access control devices (if not built-in).

• Configure access permissions and open/close signals.

• Connect with central control software or standalone controller.

7. 安全 & Emergency Checks

• Simulate a power failure or fire alarm to verify fail-safe (自動開通) 機能.

• Check sensor accuracy and passage detection.

• Make sure LED indicators and alarms respond correctly.

8. Final Adjustment & 試運転

• Adjust swing arm tension and delay time as needed.

• Calibrate passage direction, 速度, and user prompts.

• Secure all covers and clean the turnstile surface.

✅ 手記: Always follow the installation manual and comply with local electrical and safety codes. Improper installation may affect gate performance or warranty validity.

🚪 Use and Operation

Compact swing gate turnstile offers smooth and intelligent pedestrian control for various scenarios. Key usage aspects include:

• Access Modes: 複数の認証方法をサポートしています: RFID, 指紋, 顔認識, QRコード, またはモバイルアプリ. You can configure entry and exit directions separately.

• Passage Logic: Once a valid credential is presented, the gate opens automatically. It resets if no passage occurs within the set time.

• 安全機能: The gate stops movement when obstruction is detected. In case of power outage or fire alarm, it opens automatically for emergency evacuation.

• User Feedback: LED indicators and optional audio prompts guide users through access steps. Visual cues show direction and status clearly.

• メンテナンス & 清掃: Regularly clean sensors and swing arms. Check for firmware updates or wear in mechanical parts. Prevent dust or moisture from entering the cabinet.

Before starting installation or wiring, be sure to disconnect the power supply to avoid the risk of electric shock or damage to internal components. The device should not be used in environments with high temperature, excessive humidity, または強い電磁干渉, as these conditions may affect its performance and longevity.

To ensure stable operation, regularly inspect the working status of key components such as the card reader and electric lock. Pay attention to response speed and abnormal behavior to detect potential issues early.

If the device malfunctions, do not attempt to disassemble or repair it by yourself. Contact qualified technical personnel to perform inspection and maintenance, in order to avoid further damage or safety hazards.

1. What happens to the gate during a power failure?

In the event of a power outage or emergency signal (such as a fire alarm), the swing gate automatically unlocks and opens to allow free passage, 安全な避難の確保.

2. Can the turnstile integrate with existing access control systems?

はい. The swing gate supports integration with most access control platforms using standard interfaces such as RS485, TCP/IP, および乾燥接触. It also works with RFID, 指紋, 顔認識, and QR code systems.

3. Is the gate suitable for outdoor use?

Outdoor installation is possible with the weatherproof (IP54 or IP65) version. For best results, we recommend placing the gate under a canopy or sheltered area to protect it from direct rain and sunlight.

4. What is the typical passage width and can it be customized?

The standard passage width is 600 ミリメートル. しかし, it can be customized up to 900 mm to accommodate wheelchairs, ベビーカー, or wider items, モデルによって異なります.

5. How often does the gate require maintenance?

The system is designed for low maintenance. We recommend checking the sensors, スイングアームの動き, and access control response every 3 宛先 6 months to ensure optimal performance.